The Enphase Envoy is your portal to what the system is doing on site.
Every Enphase installation has an Envoy installed somewhere within the property, talking to the inverters and sending the information to the online Enlighten monitoring portal.
There are 4 main elements
- WEB (top right) - shows if the system is connected to the internet (+WEB if connected, -WEB if no internet)
-
192.168.1.100 (top left) - the internet connection address, this will be set up by the installer at install - no need to change unless instructed
Central display then cycles
-
Life time kWh - energy produced over life
- Power produced instantaniously